Position Description	Diagram / Position Graphic	Breathing
Position 1: Inhale and maintain the position as shown in figure in standing position with hands joined together near chest, feet together and toes touching each other.		INHALE
Position 2: Exhale and bend forward in the waist till palms touch the ground in line with the toes. Don't bend knees while performing. At first you may find it difficult to attain the ideal position but try to bend as much as possible without bending in knees. Do's - While exhaling bend forward in the waist - Palms touching the ground, fingers pointing forward, thumbs at 90 degree angle - Legs straight - Try to touch the forehead to the knees - Relax the neck Don'ts - Do not bend the knees. - Do not keep the neck tense.		EXHALE
Position 3: Inhale and take the left leg back with left toes on the floor, press the waist downwards and raise the neck, stretch the chest forward and push shoulders backwards. Keep the right leg and both the hands in the same position. Keep the right leg folded. Dos - Take the left leg backwards and touch the knee to the floor, keeping the toes erect. - The knee of the right leg will be bent - The knee of the left leg should touch the ground - Drop the waist/ hips towards the floor - Gaze is upwards, both arms are straight Don'ts - Do not bend the neck forward. - Do not bend the elbows.		INHALE
Position 4: Hold the breath and raise the knee of left leg. Take the right leg backwards and keep it close to the left leg. Straighten both the legs and both hands. Keep the neck straight and site fixed. Keep both the toes erect. Take care that the neck, spine, thighs and the feet are in a straight line. Dos - Take the right leg back and place it beside the left leg, keeping the toes erect - Keep the body in one straight line – plank position - Keep the arms straight - Gaze forward Don'ts - Do not bend the arms - Do not look towards the floor - Do not drop the hips/waist towards the floor - Do not stick the buttocks into the air - Do not bend the knees		HOLD THE BREATH
Position 5: Exhaling bend both the hands in elbows and touch forehead on the ground, touch the knees on the ground, keep both the elbows close to chest. The forehead, chest, both the palms, both the toes, knees should touch the ground and rest of the body not touching the floor. Since only eight parts rest on the ground , it is called ' Ashtanga' position. Dos - Bring the body towards the floor placing the 8 parts on the floor: Toes, knees, chest, palms, and forehead - Keep the hands close to the body, next to the shoulders - Keep the elbows pointed to the sky and close in to the body Don'ts - Do not touch the thighs, hips, waist or abdomen to the floor - Do not touch the chin to the floor - Do not let the elbows fall away from the body		EXHALE
Position 6: Inhale and straighten the elbows, stretch the shoulders upwards, press the waist downwards but dont bend the arms. Keep the knees and toes on the floor. Push the neck backwards and site upwards. Dos - Push the upper body upwards so that the arms are straight - Keep the fingers pointed forwards, palms on the ground, thumbs at 90 degree angle - Open the chest, pull the shoulders downwards - Drop the head and neck backwards and gaze upwards towards the sky - Keep the heels, legs and knees together - Keep the toes erect Don'ts - Do not let the legs or heels be apart - Do not bend the elbows - Do not hunch the shoulders towards the ears   Position 7: Hold the breath, bend the neck downwards and press the chin in the throat, push the body backwards and touch the heels on the ground, raise the waist upwards, do not move the palms on the floor. Dos - Push the body upward so the buttocks and waist are raised into the air, leaving the body in an Inverted 'V' position - Take the head and chin towards the chest - Try to touch the heels to the floor Don'ts - Do not bend the legs in the knees - Do not bend the arms		INHALE
		HOLD THE BREATH
Position 8: Hold the breath as in position 7, bring the right leg in the front and place it in between the hands like in position 3 but instead of left leg in the front here take right leg and place left leg in the back with left knee and toes on the ground. Dos - Take the right leg forward and place it between the hands - The knee of the right leg will be bent - The knee of the left leg should touch the ground - Drop the waist/ hips towards the floor - Gaze is upwards, both arms are straight Don'ts - Do not bend the neck forward. - Do not bend the elbows.		HOLD THE BREATH
Position 9: Exhale and bring the left leg forwards as in the position 2 and place it in between both the arms. Do's - Take the left leg forward and place it beside the right - Palms touching the ground, fingers pointing forward, thumbs at 90 degree angle - Legs straight - Try to touch the forehead to the knees - Relax the neck Don'ts - Do not bend the knees. - Do not keep the neck tense.		EXHALE
Position 10: Inhaling start getting up and attain the position as in position 1.		INHALE

Reference Book:- Yoga

Linksys SRW 2420 Reset Administrator Password

1.) Connect the Linksys serial cable that came with the switch between the switch serial port and a nearby computer serial port. For Windows, use Hyper Terminal or VanDyke CRT/SecureCRT. For Linux, use minicom. For other unix types, try cu/tip..
2.) The switch default serial port configuration is set to 38400 baud, 8 data bits, no parity, 1 stop bit, no flow control..
3.) Confirm that you have a valid serial connection by pressing enter a few times. You should be prompted with a login screen..
4.) If you have successfully established serial communication with the switch, reboot the switch by disconnecting and then reconnecting it's power cable..
5.) The switch will begin its POST procedure as displayed in the serial terminal emulator. Be ready at the keyboard to press the Esc key..
6.) Watch for the following line to appear during the boot sequence. When you see it, immediately press the Esc key;.
"Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.".
IMPORTANT: Do not hold down the Esc or Enter/Return key during the boot sequence. Only press the Esc key when prompted..


7.) If you successfully interrupted the boot sequence, you will be prompted with a Startup Menu. Option number 3 will be the "Password Recovery Procedure". Select this option..
8.) The terminal will display, "Current password will be ignored!". Press enter to continue with the boot sequence..
9.) The default account "admin/<blank>" will be enabled and you can log into the switch using this account. From here, you can set new accounts without having lost the switch configuration..
10.) After you have configured new accounts and documented the passwords, reboot the switch and log in normally to confirm that passwords have been recovered successfully..
11.) You are done. Disconnect and store the serial cable in a safe place for future use. Be sure to document a login username and password somewhere safe for future reference.

E-MAIL RELAY

E-MAIL RELAY?

A. A user in your domain wants to send e-mail to another user in your domain - This is NOT relaying.
B. An outside user (from the Internet) wants to send e-mail to another user in your domain - This is NOT relaying.
C. A user in your domain wants to send e-mail to an outside user (on the Internet) - This IS relaying.
D. An outside user (from the Internet) wants to send e-mail to an outside user (on the Internet) - This IS relaying.